17 mm x 40 mm x 12 mm Fersa 6203-2RS deep groove ball bearings

Bearing Retained:Yes (with retaining; Number of Bearings:Double; Bearing Part Number:6002; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Flange Shape:C

A:48 mm; T min.:-20 °C; Weight:4.14 kg; d:47.62 mm; A2:67 mm; C:62 kN; S:22 mm; Designation of housing:FL310-; B:61 mm; A1:19 mm;

d1:32.4 mm; S:17 mm; A1:10 mm; C:12.8 kN; A:29.5 mm; L:86 mm; B:34 mm; Recommended tightening torque for set screw:5.5 Nm; C0:6.65 kN; s1:30.5 mm;

Days to Ship:8 Days; Bearing Retained:Yes (with retaining; RoHS:6; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing I.D. d(mm):40; Bearing Retained:Yes (with retaining; Bearing Part Number:6008; Volume Discount:Available; Number of Bearings:Double;

Static load, C0:4.4 kN; Outer Race Width:0.276 Inch | 7 Milli; Inner Race Width:0 Inch | 0 Millimete; Brand:NTN; Nlim (grease):12,000 rpm; Radial clearance class:CN; Rolling Element:Ball Bearing; Weight / Kilogram:0.029; da min:42 mm; Manufacturer Name:NTN;

e:0.33; Product Group:B04334; Manufacturer Name:NTN; Y0:1; Minimum Buy Quantity:N/A; Dynamic load, C:107 kN; Min operating temperature, Tmin:-40 °C; Brand:NTN; Inventory:0.0; Weight / Kilogram:0;

Bearing Inner Dia. Shape:Cylindrical Bore; Surface Treatment:No; Unit, Type:Plummer Block; Surface Treatment:No; Unit, Type:Plummer Block; Width a(mm):445; Plummer Block Dia., Type:Standard Shape; Length b(mm):130; Shaft diameter(φ):115; Unit Body Material:Gray Cast Iron (FC 2;

d:28.58 mm; D:62 mm; r:0.6; SW:3.18 mm; C:16 mm; m:6 mm; C1:5 mm; Recommended tightening torque for set screw:3.7 Nm; S:8 mm; B:30 mm;

D:40 mm; Nlim (grease):12,000 rpm; Characteristic rolling element frequency, BSF:3.78 Hz; f:1.12 mm; Mass:0.07 kg; f0:12.8; Fatigue limit load, Cu:0.21 kN; Min operating temperature, Tmin:-25 °C; Db min:45.5 mm; da min:21 mm;

L2:19 mm; T min.:-20 °C; C:43.55 kN; Weight:3.8 kg; Designation of bearing:UC211-35G2T20; H1:130 mm; B:55.6 mm; H2:102 mm; G:M6x1; Designation of housing:T211N-;

Unit Body Material:Cast iron made; Unit Body Material:Cast iron made; Basic Load Rating Cor(KN):140.4; Surface Treatment:No; Type of Insert Bearing:Cylindrical Bore Sha; Bearing Unit, Type:Insert Bearing; Bearing Unit, Type:Insert Bearing; Pillow Type, Category:Standard; Basic Load Rating Cr(KN):173

Weight:0.43 kg; A1:10 mm; Designation of housing:FE203-; T min.:-20 °C; A:29.5 mm; d1:27.2 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; B:19.1 mm; Designation of bearing:ES201-08G2T20;

Flange O.D. H(φ):52; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing I.D. d(mm):12; Number of Bearings:Double; Flange Shape:Compact Type; Width T(mm):21; Bearing Retained:Yes (with retaining; Seals:VV (Non-Contact Rubb; Housing Material:304 Stainless Steel;

L:85 mm; G:M6x1; Designation of bearing:EX206G2L3; C0:11.2 kN; Dz:70 mm; H2:83 mm; Designation of housing:PG206N-; J:60 mm; Designation of open end cover:SCOE206-30; H:42.9 mm;

Bearing Retained:No; C Chamfered:Not Provided; Bearing Retained:No; Shape:T-Shaped; Days to Ship:8 Days; Thickness, Height Indication:T Selection, h Confi; Height H(mm):25 ～ 50; Type:Bearings with Housin; Shape:T-Shaped; Bearing I.D. d(mm):15;